Mindy’s 3D Wedding Escort Card DIY Tutorial
Today we are featuring an easy DIY project that will add some pop to your escort cards!
Here’s what you’ll need:
- Paper Trimmer
- Glitter Scrapbook Paper
- Paper Punch in a shape of your choice
- Paper Cutting Tool
- 3D Foam Squares (for scrapbooking)
Estimated cost: $57 for 100 cards
(Note: You can easily make more with additional glitter paper and foam squares for approx. $7 per 100 cards.)
Once your seating cards are printed out on cardstock, use your paper trimmer to trim half an inch off each side. Then measure out the half way point on both sides and make the cuts, so you end up with four escort cards.
Turn the seating card over and measure the halfway point where you will eventually bend the card, and draw a line from left to right in pencil.
Next, use a round object as a template to draw a half circle. I used an empty iced coffee bottle and it seemed to be the perfect size. Check the front side of the card before you draw, to make sure you are drawing on the correct side. The half circle should be “above” where the text is.
After tracing the half circle, use the cutting tool to slice through the card stock along the half circle only. Be careful not to cut below the left-to-right pencil line or it will diminish the effect.
Once the half circle is cut, you can bend the paper back to create the escort card tent. You can also use a pair of scissors to carefully trim away any rough edges along the half circle.
Next, use the punch to punch out one shape for each card.
Place a foam square on the back of each shape, then remove the paper backing and stick on to your escort card, in the middle of the half circle.
You can stop here if you want, or you can use a marker to add a bit of flourish to the corners of the card.
You can use the same color or a corresponding wedding color. Or, you can use different colors to signal to the wait staff who gets what meal. For example – use blue for steak, purple for chicken, and green for vegetarian. Or you could even use different color glitter paper or different punch shapes to correspond to the guest tables (the Purple table, the Pink table, or, the Castle table, the Heart table, etc). There are a lot of different possibilities with this DIY project. Have fun!